2022

• Infomation Day Battery Simulation 2022

  The Battery Simulation Info Day took place in Stuttgart on June 22, 2022.
  • Session 1: Product-Portfolio Overview10:15 – 10:45: Overview on how Simulation helps in Battery development and Integration (Maik Schenke, DYNAmore GmbH, and Rolf Reinelt, Ansys Inc.)
    Illustration of challenges in battery modelling and overview on suitable simulation approaches accouting for mechanical and thermo-electrical effects.Click here for the recording*

    10:45 – 11:30: Modular Multiphysics Simulation of Lithium-Ion Batteries under Use and Abuse Load Cases with LS-DYNA (Nils Karajan, DYNAmore GmbH)
    Thermo-mechanical-coupled battery model in LS-DYNA to simulate for charge and discharge use cases as well as short circuiting and thermal runaway.

    Click here for the recording*

    11:30 -12:00: Thermal Abuse Simulation in a Battery (Rolf Reinelt, Ansys Inc.)
    Thermal-runaway simulation and validation for single cells and multi-cell modules in Ansys Fluent.

  • Session 2: Thermo-Electric Effects13:00 – 13:30: Mechanical and electrical test procedures to characterise the behaviour of lithium-ion batteries (Emanuele Michelini, TU Graz)
    Overview on different tests on lithium-ion cells to calibrate and validate simulation models.Click here for the recording*

    13:30 – 14:00: Multi-physical characterization and simulation of battery cells for predicting abuse scenarios (Martin Schwab, 4a Engineering)
    Testing of thermal runaway of single and multi-cell compound to calibrate simulation models in LS-DYNA.

    Click here for the recording*

    Session 3: Mechanical properties
    

    14:00 – 14:30: Modelling of the Mechanical Behaviour of Li-Ion Pouch Cells for Different Level of Detail (Alexander Schmid, TU Graz)
    Investigation of different deformation modes for pouch cells and establishement of short-circuit criteria to determine failure.

    Click here for the recording*

  • Session 4: Battery-System Management15:30 – 16:00: Better Battery Management via System Simulation (Rolf Reinelt, Ansys Inc.)
    Embedment of current battery-modelling approach  into holicstic-battery system simulations.16:00 – 16:30: Discussion and Farewell (Maik Schenke, DYNAmore GmbH)

    *Declaration of consent to the use of personal data: By playing the recording, you consent to the use and processing of your data for general event organization and promotional purposes. You can revoke your consent at any time by contacting DYNAmore GmbH by phone or in writing.

• Infoday Automotive and Aerospace Applications

  The Infoday Automotive and Aerospace Applications took place on December 1st, 2022 in Berlin and was streamed on our YouTube-Channel.
  • 09:00 – 09:10 am: Welcome (M. Merten, DYNAmore)
  • 09:10 – 09:40 am: Digital. Efficient. Sustainable. Simulation possibilities in the innovative aerospace supply industry (Dr. Meyer, Heggemann)
  • 09:40 – 10:00 am: DYNAmore GmbH – Your partner for innovative FEM calculation (M. Merten, DYNAmore)
  • 10:00 – 10:30 am: High-Fidelity Modelling and Simulation of Jet Engines using LS-DYNA (Dr. Hornig, TU Dresden)
  • 10:30 – 11:00 am: Coffee break
  • 11:00 – 11:30 am: Isothermal Hot Forming of Titanium Blanks – From Characteristic Determination to the Component (Mr. Kaiser, Heggemann)
  • 11:30 – 12:00 pm: Examples for AM-Simulations in LS-DYNA (Dr. Buhl, BTU Cottbus)
  • 12:00 – 12:30 pm: Simulation of resistive heating of titanium blanks (M. Merten, DYNAmore)
  • 12:30 – 1:30 pm: Lunch break
  • 1:30 – 2:00 pm: GISSMO for Damage and Failure Prediction (Dr. Koch, DYNAmore MCC)
  • 2:00 – 2:30 pm: A new material model for continuous fiber reinforced plastics in crashworthiness analysis (Dr. Klöppel, DYNAmore)
  • 2:30 – 3:00 pm: Closed process chain for the simulation of fiber reinforced composites in LS-DYNA using ENVYO (T. Usta, DYNAmore)
  • 3:00 – 3:30 pm: Multiphysics Modeling of Batteries with LS-DYNA (Dr. Karajan, DYNAmore)

• DYNAmore Express: Short Overview of Damage and Failure Models in LS-DYNA

  Download the slides of the webinar from July 15, 2022.

• Informationday Infotag Optimization with ANSA, LS-OPT and META

  Download the slides of the webinar from July 13th, 2022.

   Overview

   Optimization with LS-OPT

   Parameterisation in ANSA

   LS-TaSC and LS-OPT

   ANSA Morphing

• DYNAmore Express: Solid Element Formulations in LS-DYNA

  Download the slides of the webinar from June 3, 2022.

• DYNAmore Express: Arbitrary-Lagrangean-Eulerian (ALE) Method

  Download the slides of the webinar from May 6th, 2022.

• DynaXtend – Flexible and short-term LS-DYNA software and hardware lease

  Download the slides of the webinar from March 18th, 2022.

• LS-PrePost: News, Tips and Tricks

  Download the slides of the webinar from February 18th, 2022.

• Topology optimization with LS-TaSC and parametric optimization with LS-OPT

  Download the slides of the webinar from January 21, 2022.

2021

• LS-Opt Staus Update

  Download the slides of the webinar from November 12th, 2021.

• Topology optimization of an automotive hood for multiple load cases and disciplines

  Download the slides of the webinar from November 19th, 2021

• Transferring phase transformation data from MAT_244 to MAT_254

  Download the slides of the webinar from August 6th, 2021.

• Robustness in (Sheet) Metal Forming with LS-OPT

  Download the slides of the webinar from July 17, 2021.

• New Features in LS-OPT 7.0

  Download the slides of the webinar from April 30th, 2021

• Isogeometric Analysis in LS-DYNA with the new CAD-inspired *IGA keywords

  Download the slides of the webinar from April 16th, 2021.

• Real-time crash simulation and optimization via an ODYSSEE-LS-DYNA coupling

  Download the slides of the webínar from March 26, 2021

• Beyond FEA: Smoothed Particle Hydro-Dynamics (SPH)

  Download the slides of the webinar from March 12th, 2021

• Optimization with ANSA, LS-OPT and META

  Download the slides from the March 10, 2021 webinar

  • Coupling ANSA and META to LS OPT
  • Model Parameterization in ANSA

• Recent developments in the DYNAmore Nordic Python toolbox to visualize and build tools for LS-DYNA

  Download the slides of the webinar from February 26th, 2021

• LS-DYNA Express: Hints when switching from an explicit to an implicit deck

  Download the slides of the webinar from February 5, 2021

• Magnets, Ferromagnets and Actuators simulated with LS-DYNA

  Download the slides of the webinar from December 2nd, 2021.

2020

• DYNAmore Express: LS-DYNA R12.0 New Features

  Download the slides of the webinar from November 6, 2020

• DYNAmore Express: Overview on Airbag-Modeling Possibilities in LS-DYNA

  Download the slides of the webinar from September 25, 2020

• DYNAmore Express: Beyond FEA – The Element-free Galerkin Method

  Download the slides of the webinar from July 31st, 2020

• DYNAmore Express: Tips and tricks for successful implicit analysis with LS-DYNA

  Download the slides of the webinar from July 17th, 2020

• DYNAmore Express: LS-PrePost: News, Tips and Tricks

  Download the slides of the webinar from July 24th, 2020

• DYNAmore Express: Modeling plastics in LS-DYNA

  Download of the slides of the webinars from June 19 and 26, 2020

• DYNAmore Express: Simulating Thermal Mechanical Coupled Processes with LS DYNA

  The slides of the webinar from April 9th, 2020

• DYNAmore Express: Good old *MAT_024 – A review of LS-DYNA’s most popular material model

  Download the slides of the webinar from May 29, 2020

• DYNAmore Express: Introduction to material characterization

  Download the slides of the webinar from May 22, 2020

• DYNAmore Express: Coupling ANSA and META to LS-OPT

  Download the slides of the webinar from May 15, 2020

• DYNAmore Express: Model Parameterization in ANSA

  Download the slides of the webinar from May 8, 2020

• DYNAmore Express: Recent developments in GISSMO

  Download the slides of the webinar from April 30th, 2020

• Infoday Human Modeling

  Presentations of the Information day from March 5th, 2020

  • 01_Active Human Body Models for Ergonomics and Safety Research and Development
  • 02_Muscle Modeling in LS-DYNA

• DYNAmore Express: Overview on LS-TaSC and new features in version 4.1

  The slides of the webinar from April 17th, 2020

• MCC – Vision

  Presentations of the MCC Open Day, January 30th, 2020

2019

• Webinar: New Features in LS-OPT

  Download the presentation slides of the webinar from October 24th, 2019

• Webinar: New Features in LS-DYNA 2019

  Download the presentation slides from the webinar on September 13th 2019

• Webinar: ANSA/META/LS-OPT (3/2019)

  Download the presentation slides from the webinar on March 19th.

  • Model Parameterization in ANSA
  • Coupling ANSA and META to LS-OPT

2018

• Information Day ENVYO and Composite Analysis

  Download the presentations of the information day “Envyo and Composite Analysis” on 12th March 2018

  • Recent Devolpments in ENVYO
  • Recent Developments in LS-DYNA for Composites
  • Composites Manufacturing Process Modeling with Introduction to J-Composites
  • Modelling crash behaviour in future lightweight composite vehicle
  • Structural analysis of thermoplastic composites components integrating process simulation mapping with ENVYO
  • Fiber Reinforced Thermoplastics Under Dynamic Loading From Deformation To Failure
  • Simulation and CT Technology in Textile LightWeight Design
  •  Investigation of Energy Absorption in Textile Composites with the Mapping Tool ENVYO

• Information day Optimization with ANSA, LS-OPT and META

  Download the presentations of the information day from 5th February 2018 in Leinfelden-Echterdingen

  • 01_LS_OPT_overview_and_60_features.pdf
  • 02_Parametrisierung_in_ANSA.pdf
  • 03_Optimization_LS-OPT.pdf
  • 05_CFD.pdf

2017

• Webinar “New Features in LS-DYNA R10.0”

  Download the presentation slides of the webinar “New Features in LS-DYNA R10.0”

• Webinar Multiphysics

  Download of the presentation of the webinar “Multiphysics” from 29th November 2017

• Information Day Welding and Heat Treatment with LS-DYNA

  Download the presentations of the information day “Welding and Heat Treatment with LS-DYNA” on 17th October 2017 in Aachen

  • 01_Invitation_Flyer
  •  02_Agenda
  • 03_Loose_Examples
  • 04_Rohbrecht_DynaWeld
  • 05_Mokrov_SimWeld
  • 06_Kloeppel_DYNAmore

• Download Information Day NVH Analyses 10/2017

  Download the presentations of the information day “NVH Analysis” on 10th October 2017

• Download Information Day Envyo and Composite Analysis 3/2017

  Download the presentations of the information day “Envyo and Composite Analysis” on 13th March 2017

  • 01_Mapping and Data Management along the Simulation Process Chain with the Mapping Tool Envyo
  • 02_Benefits of the Mapping Tool ENVYO for Simulation of Braided Composites
  • 03_Kopplung von Drapier- und Verzugsimulation zur Verbesserung der Geometrieprognose von CFK-Bauteilen
  • 04_Anisotropes Materialverhalten – über kurz oder lang zur Materialkarte
  • 05_Crashsimulation langfaserverstärkter Thermoplaste mit einem USER Material Modell
  • 06_Failure criteria for polypropylene-based compounds: current development with MAT_157
  • 07_Neuerungen in LS-PrePost für das Pre- und Postprocessing von Composites

• Download Webinar Optimization with ANSA/LS-OPT 03/2017

  Download the presentations of the webinar “Optimization with ANSA/LS-OPT/META” from 6 March 2017.

  • Webinar Parametrisierung in ANSA 03/2017
  • Webinar Optimierung mit LS-OPT 03/2017

2016

• New Features in LS-DYNA Version 9.0.1

  Download the presentation of the webinar “New Features in LS-DYNA R.9.0.1” on 12 December 2016

• Download: Information Day Welding

  Download the presentations of the information day “Welding and Heat Treatment with LS-DYNA” on 29 September in Aachen, Germany.

• Download information day “Human Models, June ´16

  Download the presentations of the information day “Human Models”, on 2 June in Stuttgart.

  • 00 – DYNAmore Info Humanmodels 2016 Introduction
  • 01 – Aktuelle Anwendungen und Entwicklungen des THUMS-D – Status der Implementierung und Validierung aktiver Muskeln
  • 02 – Das menschliche Verhalten bei seitlichen Fahrzeugmanövern – Far-Side” Crash, Spurwechsel und Seitenkollision
  • 03 – Dreidimensionale, kontinuumsmechanische Modellierung des muskuloskeletalen Apparates
  • 04 – Computersimulation mit einem digitalen Menschmodell zur Prognose von Produkt- und Produktionsergonomie
  • 05 – From Head-neck Biomechanics to Advanced Injury Prediction Tools
  • 06 – Aktuelles von den THUMS Menschmodellen
  • 07 – Das CASIMIR-Modell für die Simulation von Sitzkomfortanwendungen – Status für LS-DYNA
  • 08 – Invitation Flyer

• Download: Information Day SDM, 9 May 2016

  Download the presentations of the information day “Process Automation and Simulation Data Management “, on 9 May in Stuttgart.

  • 01 Agenda
  • 02 LoCo – An Innovative Process and Team Data Management (SCALE)
  • 03 Multistage Assembly with a wheel generation process example (SCALE)
  • 04 CAViT – Eine Arbeitsumgebung für Auswertung, Vergleich und Validierung von CAT- und CAE-Ergebnissen (SCALE GmbH)
  • 05 Compression of simulation results in the context of SDM systems (SIDACT)

• New Features in LS-DYNA R.8.1

  Download the presentation of the webinar “New Features in LS-DYNA R.8.1” on 13 April 2016

• Robustness Analysis with LS-OPT

  Download the presentation of the webinar “Robustness Analysis with LS-OPT on 11 April 2016

• Download: Information Day Welding. March/April ´16

  Download the presentations of the information days “Welding and Heat Treatment with LS-DYNA”, on 7 March in Stuttgart and on 14 April in Zurich.

  • Welding Simulation with LS-DYNA – Recent Developments
  • Welding and Heat Treatment with LS-DYNA
  • Invitation brochure Zurich
  • Lifetime Prediction of Welded Structures by Means of Welding Simulation
  • Invitation brochure Stuttgart
  • Möglichkeiten in LS-DYNA für die Simulation von Schweißprozessen und Wärmebehandlung
  • Welding Simulation and Heat Treatment Simulation

• Download Multiphysics, April ´16

  Download the presentations of the webinar “Multiphysics with LS-DYNA”, 4 April 2016.

  • EM-BatterieCrashSimulation
  • ICFD-Solver

• Download Information day Integrated Formoptimization, Feb. ´16

  Download the presentations of the information day “Integrated Formoptimization with ANSA, LS-OPT and META”, 29 February 2016, Stuttgart, Germany.

  • Formoptimierung einer Motorhaube
  • Optimierungsprozesse mit ANSA/LS-OPT/META: Prozesskopplung und praxisnahe Beispiele
  • Invitation Flyer
  • Das Zusammenspiel zwischen LS-OPT/ANSA/ META – Setup der Optimierung
  • Optimierung mit LS-OPT: Möglichkeiten und neue Entwicklungen in LS-OPT 5.2
  • Möglichkeiten der Modellparametrisierung in ANSA

• Download Informationstag Implicit Analysis, Feb. ´16

  Download the presentations of the information day “Implicit Analysis with LS-DYNA”, 23 February 2016, Stuttgart, Germany.

  • Invitation Flyer
  • Tips and Tricks for a Successful Implicit Simulation with LS-DYNA
  • Introduction
  • Dummy Positioning for a Whiplash Load Case Using LS-DYNA Implicit

2015

• Download: Information Day Welding, Oct. ´15

  Download the presentations of the information day “Welding and Heat Treatment with LS-DYNA”, 20 October 2015, Aachen

  • Process Chain
  • DynaWeld
  • Agenda-Flyer
  • Basics
  • LS DYNA
  • Joining Technologies

• Download Webinar LS-OPT – ANSA – µETA

  Download the presentations of the webinar “Integrated Optimization with ANSA, LS-OPT und META”, 28 April.

  • The Interaction Between LS-OPT, ANSA and µETA
  • Model Parameterization in ANSA

• Webinar LS-DYNA/Implicit

  Download the presentations of the webinar “Implicit Analysis with LS-DYNA “, 27 February 2015

• Download: Information Day Welding

  Download the presentations of the information day “Welding and Heat Treatment with LS-DYNA”, 9 March 2015, Stuttgart

  • DynaWeld
  • Prozess Chain
  • LS-DYNA
  • Joining Technologies
  • Basics

• Download Information Day SDM

  Download the presentations of the information day “Process Automation and Simulation Data Management (SDM)”, 3 March 2015, Stuttgart, Germany

  • 01 Agenda
  • 02 Neue Entwicklungen in LoCo (SCALE GmbH)
  • 03 Auswertung großer CAE-Datenmengen (SCAI, Fraunhofer)
  • 04 CAViT – Auswertung von Versuchs- und Simulationsdaten (SCALE GmbH)

2014 and earlier

• Umformtrends in LS-DYNA und eta/DYNAFORM

  Download of presentations of info event “Umformtrends in LS-DYNA und eta/DYNAFORM”, 12 March 2014 in Attendorn, Germany

  • Abstreckziehen – Grenzen und Möglichkeiten in der aktuellen Modelltechnik
  • Umformtrends in LS-DYNA und eta/DYNAFORM
  • Warmumformen in DYNAFORM 5.9.2 / Tipps und Tricks in DYNAFORM
  • Einladung mit Agenda

• Integrated Optimization with ANSA, LS-OPT and META

  Download of presentations of info event “Integrierte Optimierung mit ANSA, LS-OPT und META, 24 February 2014 in Stuttgart, Germany

  • Invitation and Agenda
  • Integrierte Schweisspunktoptimierung mit LoCo, LS-OPT und ANSA
  • Vorstellung von LS-OPT v5 mit Workflow-Interface
  • Formoptimierung mit LS-OPT v5 und ANSA/META
  • Möglichkeiten der Modellparametrisierung in ANSA

• 2013 Dynamic Charakterization of Polymers

  Download of presentations of info event “Dynamic Charakterization of Polymers”, 24 September 2013 in Filderstadt near Stuttgart, Germany

  • Einführung und Überblick
  • Einführung in die Charakterisierung und Modellierung von Kunststoffen
  • Kurzvorstellung der Messmöglichkeiten mit 4a impetus
  • Einfache Materialkartengenerierung mit 4a impetus mittels Neuronaler Netze für Schäume, Waben
  • Anpassung von Werkstoffmodellen für Polymere mittels dynamischer Pendelversuche
  • Dynamische Materialcharakterisierungen von Composites mit 4a impetus
  • Anpassung komplexer Fließflächen und Möglichkeiten der Versagensabbildung mit 4a impetus

• 2013 Biomechanics with LS-DYNA

  Download of presentations of info event “Biomechanics with LS-DYNA”, 12 November 2013 in Stuttgart, Germany

  • Invitation and Agenda
  • Gait Analysis on a Virtual Human Dummy Based on Patient Anthropometry
  • A Variable Finite Element Model of the Human Masticatory System for Different Loading Conditions
  • Overview on Biomechanical Material Models in LS-DYNA
  • Image Based Modeling for Realistic Human Simulation using Simpleware
  • THUMS User Community

• 2013 Nonlinear Topology Optimization

  Download of presentations of the workshop “Nonlinear Topology Optimization”, 23 September 2013 in Stuttgart, Germany

  • Finden von Regeln für topologische Änderungen von Crash-Strukturen
  • Agenda
  • Das asc(s und seine Forschungsaktivitäten
  • Erfahrungen bei der Anwendung der Equivalent Static Load Methode (ESLM) für Topologieoptimierung bei Impaktproblemen mit Genesis und LS-DYNA
  • Topologieoptimierung von dünnwandigen Strukturen hinsichtlich der Energieabsorption im Crash
  • Graphen- und Heuristik-basierte Topologieoptimierung

• 2013 Acoustic Simulation and NVH Analysis with FEM and BEM in LS-DYNA

  Download of presentations of info event “Acoustic Simulation and NVH Analysis with FEM and BEM in LS-DYNA”, 23 September 2013 in Stuttgart, Germany

  • Invitation and Agenda
  • Basic Relations in Computational Acoustics
  • Acoustics and NVH in LS-DYNA

• 2013 Process Automation and Simulation Data Management (SDM)

  Download of presentations of info event “Process Automation and Simulationsdatenmanagement (SDM)”, 2 June 2013

  • Agenda
  • Ausgewählte Lösungsbeispiele für CAE Prozess- und Datenmanagement
  • Aspekte zur Vorgehensweise bei der Einführung eines Simulationsdatenmangementsystems
  • Skalierbares Datenmanagement im CAE-Prozess mit ANSA und SPDRM
  • Möglichkeiten zur Reduzierung des Datenvolumens durch Kompression mit FEMZIP
  • Storagetechnologien für SDM

• 2013 Optimization und Stochastic Analyses

  Download of presentations of info event “Optimization und Stochastic Analyses”, 10 June 2013

  • Agenda
  • Introduction and Live Demonstration of LS-OPT Version5
  • Identification of Material Parameter with mit LS-OPT – Examples – Part 1
  • Identification of Material Parameter with mit LS-OPT – Examples – Part 2
  • Application of Stochastic and Geometric Analysis for Systematic Robustness Analysis in Structural Crash
  • Application of the Equivalent Static Load Method for Impact Problems with GENESIS and LS-DYNA

• 2013 Composite Analysis with LS-DYNA

  Download of presentations of info event “Composite Analysis with LS-DYNA”, 17 April 2013

  • Introduction
  • New Material Models in LS-DYNA
  • New Developments for Developments for Process Simulations of Composite Structures in LS-DYNA
  • About the Coupling of Digimat to LS-DYNA – a Micro- /Macro Interface for Composites Materials

• 2013 Multiphysics with LS-DYNA

  Download of presentations of info event “Multiphysics with LS-DYNA”, 4 March 2013

  • Interaction Possibilities of Bonded and Loose Particles in LS-DYNA
  • Introduction and Agenda
  • Advanced Metalforming Simulations using a Thermo-mechanical Coupling Including Phase Changes
  • Compressible CFD (CESE) Module
  • Incompressible CFD Module
  • Electromagnetism (EM) Module

• 2013 Human Models – Overview and Extension Opportunities

  Download of presentations of info event “2013 Human Models – Overview and Extension Opportunities”, 8 March 2013

  • Aktive Muskelansteuerung des THUMS mit dem Co-Simulationstool ICOS
  • Aktive Muskelmodellierung an der Schnittstelle von Mehrkörper- und Kontinuumsmechanik
  • Invitation with Agenda
  • Aktive Muskelansteuerung des THUMS mit dem Co-Simulationstool ICOS
  • Aktive Muskelmodellierung an der Schnittstelle von Mehrkörper- und Kontinuumsmechanik
  • Vehicle Safety using the THUMS Human Model

• 2012 Cold and Warm Forming Processes with LS-DYNA and eta/DYNAFORM

  Download of presentations of info event “Cold and warm forming processes with LS-DYNA and eta/DYNAFORM “, 12 November 2012

• 2012 Simulation of Plastics with LS-DYNA

  Download of presentations of the info event “Simulation of Plastics with LS-DYNA”, 26 October 2012

  • Modelling of Viscoelastic Materials with LS-DYNA
  • Parameteridentifikation für PA66 am Beispiel einer Kopfstützenhülse
  • Faserverstärkte Kunststoffbauteile im Crash
  • Eine Übersicht zur experimentellen Charakterisierung von Kunststoffen für die Crashsimulation

• 2012 Optimization, DOE-Studies and Robustness Analysis

  Download of presentations of info event “2012 Optimization, DOE-Studies and Robustness Analysis”, 21 May 2012

  • Agenda
  • Introduction in LS-OPT
  • Introduction to the New Main Release LS-OPT 5.0
  • New Developments on Identification of Material and System Parameters with LS-OPT
  • First Experiences in Topology Optimization fpr Crash with GENESIS and LS-TaSC

• 2012 Integrated Optimization with ANSA, LS-OPT and META

  Download of presentations of info event “Integrated Optimization with ANSA, LS-OPT and META”, 1 March 2012

  • Invitation brochure with agenda
  • Industrielle Anwendungsbeispiele zur Formoptimierung mit ANSA und LS-OPT
  • Process Chain for Optimization using ANSYS, LS-OPT und Meta
  • Integrierte Optimierung mit ANSA, LS-OPT und META
  • Morphing with ANSA

• 2011 Forming Simulation using LS-DYNA and ETA/DYNAFORM

  Download of presentations of info event “Forming Simulation using LS-DYNA and ETA/DYNAFORM”, 21 November 2011

• 2010 New Methodologies

  Download presentations of info event “New Methodologies and Developments in LS-DYNA”, 24 November 2010

  • About New Solid Element Types and a New Contact Method in LS-DYNA 971 R4/R5
  • EFG and XFEM: Cohesive Fracture Analysis Methods in LS-DYNA
  • Novel Methods in LS-DYNA 980: CFD-Methods CESE and PFEM
  • Meshless Methods in LS-DYNA: An Overview of EFG and SPH
  • An Introduction to Isogeometric Elements in LS-DYNA

• 2010 Forming Simulation using LS-DYNA and ETA/DYNAFORM

  Download of presentations of info event “Forming Simulation using LS-DYNA and ETA/DYNAFORM”, 29 October 2010

• 2010 Simulation of Drop Tests with LS-DYNA

  Download presentations of info event “Simulation of Drop Tests with LS-DYNA”, 28 October 2010

  • Agenda
  • Falltests von flüssigkeitsgefüllten Behältern mit Berücksichtigung von Fluid-Struktur Interaktion
  • Einfluss der Materialmodellierung von thermoplastischen Kunststoffen auf Ergebnisse von numerischen Falltests
  • Kunststoffgerechte Charakterisierung für die dynamische Simulation und Einsatzbeispiele für Falltests

• 2010 LS-OPT Update

  Download of presentations of info event “Recent and Upcoming Developments in LS-OPT and LS-OPT/Topology”, 20 October 2010

  • Agenda
  • Latest Developments in LS-OPT/Topology – Outlook to Version 2
  • New Capabilities for Visualization of Data from Optimization, DOEs and Stochastic Analysis
  • Overview of LS-OPT and Update of New Features

• 2010 Dummy Update

  Dummy models – news and updates 2010

  • Child models in new consumer tests and new regulations
  • Flex Pli GTR model update
  • HIII 5% female: Harmonized jacket
  • Child dummy model Q1.5
  • SIDIIs model update
  • Current work for BioRID II model update
  • ES-2 and ES-2re small model release
  • Child model P3
  • Current work for ES-2re and ES-2 model update
  • HIII 50 % model: Improvement document for release 7.1

• 2010 SDM / Processes

  Download documents regarding simulation data management and process optimization

  • Agenda
  • Data Management for Crash and Safety Simulation in ANSA
  • Progress report on Realization of SDM Data Management Solutions
  • Requirements and Real World Challenges on Simulation Data Management [in German]
  • Support of Data Preparation In Model Build Process

• 2010 Optimization

  • Agenda
  • Strukturoptimierung mit GENESIS und Kopplung mit LS-DYNA für nichtlineare Anwendungen
  • Erste Erfahrungen mit LS-OPT/Topology
  • Sensitivitätsanalyse in der praktischen Anwendung mit LS-OPT V4.1
  • Visualisierung von Ergebnissen aus Optimierungs- und DOE-Studien
  • Neue Entwicklungen in LS-OPT 4.1

• 2009 4a Impetus

  Download documents regarding material characterization

  • Agenda
  • Verwendung von LS-OPT zur Generierung von Materialkarten
  • LS-DYNA – Materialmodelle für polymere Werkstoffe
  • Kunststoffgerechete Charakterisierung für die dynamische Simulation

• 2009 Optimization

  Presentations of Infoday “Optimization, DOE-Studies and Robustness Analysis”

  • Agenda – November 16, 2009
  • Neue Entwicklungen in LS-OPT 4.0
  • Optimierung des Impaktors eines B-Säulen Prüfstandes
  • Methoden zur Visualisierung von Ergebnissen
  • Coupling GENESIS and LS-DYNA
  • Topology & geometry based structure optimization using implicit parametric models and LS-OPT

• 2009 Drop Tests

  Download material: simulation of droptests

  • Agenda
  • Kunststoffgerechte Charakterisierung für die dynamische Simulation und Einsatzbeispiele für Drop-Tests
  • Einfluss der Materialmodellierung von thermoplastischen Kunststoffen auf Ergebnisse von numerischen Falltests

• 2009 Hot Stamping

  Download material: recent advances in hot stamping simulation

  • Agenda
  • Practical Guidelines for Hot Stamping Simulations with LS-DYNA
  • Using LS-DYNA To Model Hot Stamping
  • Recent Developments of LS-DYNA in Stamping Simulation

• 2008 Optimization

  Infoday material regarding optimization, DOE-studies, robustness

  • Einladung Agenda Opt Infotag
  • Structural Optimization with GENESIS
  • ANSA as a Pre-Processor for LS-OPT – Optimization Applications
  • D-SPEX an advanced post-processor for optimization and stochastic investigations
  • Optimization and Robustness Analysis with LS-OPT

• 2007 Dummy Update

  Dummy models – news and updates

  • Overview of Standards and Potential for New Regulation
  • FAT Dummy Modells News and Update
  • SIDIIs and Worldsid Model Development at FTSS
  • Hybrid III 50th percentile Male

• 2007 Optimization

  Infoday material regarding optimization, DOE-studies, robustness

  • Sensitivitätsstudie bei AUDI mit LS-OPT und D-SPEX
  • Optimization and Robustness Analysis in Structural Mechanics with LS-OPT
  • Robust Parameter Design using LS-OPT 3.2
  • ANSA as a Preprocessor for LS-OPT Optimization Applications
  • Reliability-based Design – Methoden zur numerischen effizienten Bestimmung der Versagenswahrscheinlichkeit P_f

• 2005 Implicit Info

  Infoday material for implicit simulations

  • Deformable Rigid Bodies in LS-DYNA with Applications
  •  Implicit Simulations with LS-DYNA – Introduction and Applications
  • Increasing Efficiency in CAE Cockpit Development by Using LS-DYNA Explicit and Implicit with Only One Model

• 2005 Optimization

  Infoday material regarding optimization, DOE-studies, robustness

  • Robustheitsuntersuchungen am Beispiel der rechnerischen Simulation der ECE-R14 (Sitzzug).
  • Optimization and Robustness Analysis in Structural Mechanics with LS-OPT
  • Formoptmierung anhand assoziativer FE-Netze mit LS-OPT und SFE-CONCEPT

• 2005 Dummy Update

  Dummy models – news and updates

  • Development of BioRID-II model
  • Update HIII adult and child models
  • Update SidIIs and Worldsid model
  • Overview of model developments at FTSS
  • Update Eurosid, Ussid, SidHIII, ES-2, and ES-re model

• 2003 Optimization

  Infoday material regarding optimization, DOE-studies, robustness

  • Möglichkeiten der Strukturoptimierung in der nichtlinearen Strukturmechnik
  • Probabilistic Analysis with LS-OPT
  • Multidisciplinary Optimization using the Successive Response Surface Method
  • Two-Stage Stochastic and Deterministic Optimization