Mini Tutorial | Page 5: Spc

Home » Knowledge Base » LS-Prepost » Tutorials » Mini Tutorials » Pre-Processing » Mini Tutorial | Page 5: Spc

  • fig1
  • Figure 1
  • Create single point constraints
  • 1. download and unzip the keyword file plate.k
  • 2. in LS-PrePost, load the keyword file using File → Open → LS-Dyna Keyword
  • 3. go to Page 5: Spc (see Figure 1)
  • 4. select rbs Create
  • 5. activate cbc X, cbc Y, cbc Z
  • 6. in the bottom panel, select rbs Area
  • 7. in the graphics window, draw boxes to select all edge nodes
  • 8. click Apply (see Figure 2)

  • fig2
  • Figure 2

Table of Contents